Technical parameters:

1. Material: Housing-304 stainless steel (1.5mm thick), Arm - Plexiglass

2. Contains: Mechanism, Housing, Driver board, power supply

3. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz

4. Power Consumption: Working state: <60 Watt

5. Input Interface:

    +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA

6. Communication Interface: RS485 (Distance: <=1200m)

7. Access Mode:

    Automatic (when power off, arms open automatically, while power on later, arms close automatically)

8. Following speed: 30 persons/min (By Card)

9. Dimension: 1200*300*1000mm

10. lane width: 550-570mm

11. Arm length: 260mm

12. Weight: 70kgs

13. Working Environment: Indoors or outdoors with shed

Functions and features:

1. Well in design, rustproof, durable and can resist external destroy.

2. Self-inspection and alarm.

3. Clutch transmission mechanical system, durable, no noise and long life.

4. Easily integrated with any type of readers such as IC, ID, bar code and even magnetic card.

5. Bi-directional passing or single way passing.

6. Adjustable normally open or normally closed, in order to meet the requirements of the different venues.

7. Arm close delay function, after a valid pass, arms close in 10 seconds. (adjustable, from 1-60s)

8. Anti-rush function: if there is no open single, arm will be holding tightly.

9. Valid lock function can allow one passage at one time.

10. Optional LED Counting and Direction indicating.

11. Anti-clipping function. During its reposition, if arm meets any obstacle, arm will get back automatically or stop working for a while.

12. It will lock automatically if passage through turnstile is not completed within pre-set time, the setting-time can be adjusted via parameter change.